Console Faders

Console Faders
Avolites Consoles – What Fader

Console	Master Fader	Preset Fader
Pearl Tiger	08-01-0400	08-01-0200
Pearl Expert	08-01-0400	08-01-0510
Tiger Touch 1/2/Pro	08-01-0600	08-01-0510
Tiger Touch Wing	08-01-0400	08-01-0510
Titan Mobile	08-01-0510
Titan Mobile Wing	08-01-0510
Quartz	08-01-0510
Arena	08-01-0600	08-01-0510
Sapphire Touch	08-01-0800	08-01-0800
Sapphire Touch Wing	08-01-0800	08-01-0800
Sapphire Media	08-01-0800	08-01-0800
Diamond 4 Classic/Vision/Elite	08-01-0400	08-01-0500
Diamond 2/3	08-01-0006	08-01-0200
Diamond 1	08-01-0006	08-01-0001
Sapphire 2000	08-01-0400	08-01-0300
Sapphire 2000 from Nov 2002	08-01-0400	08-01-0600
Sapphire 97 late consoles (see note 1)	08-01-0006	08-01-0200
Sapphire 97 early consoles (see note 1)	08-01-0006	08-01-0001
Pearl 2000 type B above s/n 1435 (see note 2)	08-01-0300	08-01-0200
Pearl 2000 type A before s/n 1434 (see note2)	08-01-0200	08-01-0200
Pearl 2004 (above PRL 2234)	08-01-0400	08-01-0200
Azure 2000 Touch	08-01-0200
Azure 2000 Shadow	08-01-0300
QM consoles	08-01-0006	08-01-0001
80/100 consoles	08-01-0006	08-01-0001
RQ 30/60 consoles P&G mastering	08-01-0006	08-01-0001
RQ 30/60 consoles non P&G mastering	08-01-0001	08-01-0001

Fader Types	Part	Knob
Narrow	08-01-0200	08-01-00xx
Wide	08-01-0300	08-01-00xx
Ruwido	08-01-0001	08-01-1000
Sellmark	08-01-0400	08-01-0035
Black short original	08-01-0500	08-01-00xx
Black short short shaft	08-01-0510	08-01-00xx
Black Long (for Sapphire 2000)	08-01-0600	08-01-0041
P&G	08-01-0006	08-01-0007
Notes:-		Knob colours xx = 29 white xx = 31 grey
1. The fader was changed during but the serial number of the change is unknown. Check inside the console, if the faders are individually mounted then the faders are shown on the early consoles line, otherwise the faders are shown on the late console line! 2. If the serial number is near the one shown check with Avolites to ensure you are ordering the correct fader, or check the PCB which mounts the faders if it is 1201-4750A then the console is a type A if the console uses a pcb type 1201-4750B then the console is type B. 3. Fader Cleaning Faders will get dirt inside them over time and combined with the wearing of the fader track this can cause intermittent faults.Faders can be cleaned and if done correctly this will lengthen the life of a fader. At Avolites we have done extensive test on the use and over-use of DeOxid F5 fader cleaning agent, and have created a video with instructions. Although DeOxid F5 is widely available, in case that you can not obtain this there are alternatives that have been proven to work in the field: “Servisol Super 10” Farnell PN 278786 “Kontakt Chemie Cleaner 601” Farnell PN 801021 Follow the same instructions as for DeOxid F5 for the above agents. There is no benefit in cleaning working faders with any of the above agents, therefore we do not advice to do so if the product is in a particularly dusty environment, simply clean with a dry

Avolites Console Fader
08-01-0200 60mm Narrow Alpha Fader	08-01-0300 60mm Wide Alpha Fader RA60B1
08-01-0400 60mm Mastering Sellmark Fader LSVA-610	08-01-0500 45mm Preset Alpha Fader RA45D1
08-01-0600 60mm Preset Alpha Fader RA60D1